bspwm, scripts: Move service management to its own file

.config/bspwm/bspwmrc

@@ -20,21 +20,12 @@
 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 # SOFTWARE.
 
-## Clean up some variables that I use in device-specific scripts
+## Load session startup script
-unset PB_BAR_WIDTH
+dtfscript=$HOME/.config/dtfscripts/wmstartup.sh
-unset PB_MONITOR
+if [[ -x "$dtfscript" ]]; then
-
+	source "$dtfscript"
-## Patch path, if not already done
-if [[ "$PATH" != "*$HOME/.local/bin*" ]]; then
-	printf "[INFO] Patching path for $HOME/.local/bin\n"
-	export PATH="$HOME/.local/bin:$PATH"
-fi
-
-## Load device-specific scripts
-if [[ -x ".config/bspwm/$(hostname).rc" ]]; then
-	printf "[INFO] Sourcing .config/bspwm/$(hostname).rc\n"
-	source .config/bspwm/$(hostname).rc
 fi
+unset dtfscript
 
 ## bspwm GENERAL CONFIGURATION
 printf "[INFO] Setting up monitors\n"
@@ -91,55 +82,3 @@ bspc rule -a 'Minecraft 1.7.10' state=fullscreen
 bspc rule -a plasmashell state=floating sticky=on border=off
 bspc rule -a krunner state=floating layer=above sticky=on border=off
 
-printf "[INFO] Performing simple configuration\n"
-## SIMPLE CONFIGURATION
-xset -b
-xset -dpms
-xset s off
-# This depends on a script found at rehashedsalt/bin
-xrdbupdate
-
-## SERVICES AND DAEMONS
-printf "[INFO] Killing existing daemons\n"
-services="sxhkd polybar conky dunst compton"
-for service in $services; do
-	printf "  [INFO] Killing $service\n"
-	killall $service
-done
-# Wallpaper management
-# Note that this MUST happen before the compositor starts, otherwise xsetroot
-# will not apply properly
-if which xfdesktop; then
-	printf "[INFO] Starting xfdesktop\n"
-	xfdesktop&
-elif which feh; then
-	printf "[INFO] Setting wallpaper with feh\n"
-	printf "[WARN] This solution may cause problems on multi-monitor systems\n"
-	feh --randomize --bg-fill ~/Pictures/Wallpapers/.active &
-elif which xsetroot; then
-	printf "[INFO] Setting root window color\n"
-	xsetroot -solid "#282828"
-else
-	printf "[WARN] Could not find any wallpaper manager\n"
-fi
-# Don't start the compositor in a VM
-if [[ $(hostname) != "vm"* ]]; then
-	printf "  [INFO] Starting compton\n"
-	compton &
-fi
-# Different startup for OpenBSD and Linux
-if [[ $(uname) == "Linux" ]]; then
-	printf "[INFO] Starting Linux tasks\n"
-	compton &
-	$HOME/.config/polybar/start.sh &
-	sxhkd &
-else
-	printf "[INFO] Starting OpenBSD tasks\n"
-	sxhkd -c $XDG_CONFIG_HOME/sxhkd/sxhkdrc-obsd &
-fi
-# Start these all the time regardless of platform
-printf "[INFO] Starting platform-independent tasks\n"
-conky&
-dunst&
-printf "[INFO] Finished initialization\n"
-

.config/dtfscripts/wmstartup.sh

@@ -0,0 +1,95 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2018 rehashedsalt/vintagesalt
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included in all
+# copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+
+## Clean up some variables that I use in device-specific scripts
+unset PB_BAR_WIDTH
+unset PB_MONITOR
+
+## Patch path, if not already done
+if [[ "$PATH" != "*$HOME/.local/bin*" ]]; then
+	printf "[INFO] Patching path for $HOME/.local/bin\n"
+	export PATH="$HOME/.local/bin:$PATH"
+fi
+
+## Load device-specific scripts
+if [[ -x ".config/bspwm/$(hostname).rc" ]]; then
+	printf "[INFO] Sourcing .config/bspwm/$(hostname).rc\n"
+	source .config/bspwm/$(hostname).rc
+fi
+
+printf "[INFO] Performing simple configuration\n"
+## SIMPLE CONFIGURATION
+xset -b
+xset -dpms
+xset s off
+# This depends on a script found at rehashedsalt/bin
+xrdbupdate
+
+## SERVICES AND DAEMONS
+printf "[INFO] Killing existing daemons\n"
+services="sxhkd polybar conky dunst compton"
+for service in $services; do
+	printf "  [INFO] Killing $service\n"
+	killall $service
+done
+for service in $services; do
+	while pgrep $service; do
+		sleep 0.5
+	done
+done
+# Wallpaper management
+# Note that this MUST happen before the compositor starts, otherwise xsetroot
+# will not apply properly
+if which xfdesktop 2&> /dev/null; then
+	printf "  [INFO] Starting xfdesktop\n"
+	xfdesktop&
+elif which feh 2&> /dev/null; then
+	printf "  [INFO] Setting wallpaper with feh\n"
+	printf "  [WARN] This solution may cause problems on multi-monitor systems\n"
+	feh --randomize --bg-fill ~/Pictures/Wallpapers/.active &
+elif which xsetroot 2&> /dev/null; then
+	printf "  [INFO] Setting root window color\n"
+	xsetroot -solid "#282828"
+else
+	printf "  [WARN] Could not find any wallpaper manager\n"
+fi
+# Don't start the compositor in a VM
+if [[ $(hostname) != "vm"* ]]; then
+	printf "  [INFO] Starting compton\n"
+	compton &
+fi
+# Different startup for OpenBSD and Linux
+if [[ $(uname) == "Linux" ]]; then
+	printf "[INFO] Starting Linux tasks\n"
+	compton &
+	$HOME/.config/polybar/start.sh &
+	sxhkd &
+else
+	printf "[INFO] Starting OpenBSD tasks\n"
+	sxhkd -c $XDG_CONFIG_HOME/sxhkd/sxhkdrc-obsd &
+fi
+# Start these all the time regardless of platform
+printf "[INFO] Starting platform-independent tasks\n"
+conky&
+dunst&
+printf "[INFO] Finished initialization\n"
+

.local/bin

@@ -1 +1 @@
-Subproject commit 2cfc81d11f229a542442e4c5eba8945a3df76640
+Subproject commit 3bdc167c24fb481f200048f6b6aeeeb1f9d2e00c