home/.config/dtfscripts/wmstartup.sh

186 lines
5.7 KiB
Bash
Raw Normal View History

#!/usr/bin/env bash
# Copyright (c) 2018 rehashedsalt/vintagesalt
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in all
# copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
## Clean up some variables that I use in device-specific scripts
2018-08-11 17:18:15 -05:00
# General
unset TERMINAL
# Polybar
unset PB_MONITOR
unset PB_WM_RESTACK
unset PB_BAR_PRIMARY_MODULES_LEFT PB_BAR_PRIMARY_MODULES_CENTER PB_BAR_PRIMARY_MODULES_RIGHT
unset PB_BAR_PRIMARY_2_MODULES_LEFT PB_BAR_PRIMARY_2_MODULES_CENTER PB_BAR_PRIMARY_2_MODULES_RIGHT
unset PB_BAR_SECONDARY_MODULES_LEFT PB_BAR_SECONDARY_MODULES_CENTER PB_BAR_SECONDARY_MODULES_RIGHT
unset PB_BAR_SECONDARY_2_MODULES_LEFT PB_BAR_SECONDARY_2_MODULES_CENTER PB_BAR_SECONDARY_2_MODULES_RIGHT
unset PB_MODULE_BAR_WIDTH
unset PB_MODULE_ETH_INTERFACE
unset PB_MODULE_WLAN_INTERFACE
# bspwm monitorset.sh
unset BSPWM_DESKTOPS_TOTAL
unset BSPWM_DESKTOPS_PRIMARY
## Patch path, if not already done
if [[ "$PATH" != "*$HOME/.local/bin*" ]]; then
printf "[INFO] Patching path for $HOME/.local/bin\n"
export PATH="$HOME/.local/bin:$PATH"
fi
## Set the runtime directory, if not already
if [[ "$XDG_RUNTIME_DIR" == "" ]]; then
export XDG_RUNTIME_DIR="/run/user/$UID"
fi
## Load device-specific scripts
if [[ -x "$HOME/.config/dtfscripts/$(hostname).rc" ]]; then
printf "[INFO] Sourcing ~/.config/dtfscripts/$(hostname).rc\n"
source $HOME/.config/dtfscripts/$(hostname).rc
fi
printf "[INFO] Performing simple configuration\n"
## SIMPLE CONFIGURATION
xset -b
xset -dpms
xset s off
# This depends on a script found at rehashedsalt/bin
xrdbupdate
## SERVICES AND DAEMONS
# Kill everything
2018-07-31 15:59:17 -05:00
printf "[INFO] Stopping existing services\n"
services="plasmashell xembedsniproxy krunner xfdesktop polybar compton conky sxhkd dunst xob"
for service in $services; do
2018-07-31 15:59:17 -05:00
printf " [INFO] Sending signal to all $service\n"
killall $service
done
# Wait for them to die
for service in $services; do
i=0
while pgrep $service > /dev/null 2>&1; do
if [[ "$i" = "10" ]]; then
printf " [INFO] Waited too long, killing $service with prejudice\n"
pkill -9 $service
break
else
printf " [INFO] Waiting on $service\n"
sleep 0.5
i=$(expr $i + 1)
fi
done
unset i
done
2018-07-31 15:59:17 -05:00
# Start them back up
printf "[INFO] Starting services\n"
# Start with key functionality
# SXHKD
2018-07-31 15:59:17 -05:00
if pgrep bspwm > /dev/null 2>&1; then
printf " [INFO] Found bspwm, starting sxhkd\n"
2018-08-19 16:05:59 -05:00
sxhkd &
else
printf " [WARN] bspwm was started, but sxhkd wasn't! Session may be unusable!\n"
2018-07-31 15:59:17 -05:00
fi
# Compton
if which compton > /dev/null 2>&1; then
# Don't start the compositor in a VM
if [[ $(hostname) != "vm"* ]]; then
printf " [INFO] Starting compton\n"
compton &
else
printf " [INFO] In a VM, not starting compositor\n"
fi
else
printf " [INFO] Could not find a compositor\n"
fi
# Polybar
if which polybar > /dev/null 2>&1; then
printf " [INFO] Starting polybar\n"
$HOME/.config/polybar/start.sh &
else
printf " [INFO] Could not find a bar\n"
fi
# Dunst
if which dunst > /dev/null 2>&1; then
printf " [INFO] Starting dunst\n"
dunst&
else
printf " [INFO] Could not find a notification daemon\n"
fi
# XOB
if which xob > /dev/null 2>&1; then
printf " [INFO] Starting xob instances\n"
pipes="brightness volume misc"
# Set up pipes
export XOB_PIPE_DIR="$XDG_RUNTIME_DIR/xob"
2018-08-21 22:59:37 -05:00
printf " [INFO] Using pipe directory \"$XOB_PIPE_DIR\"\n"
mkdir -m 700 "$XOB_PIPE_DIR"
for pipe in $pipes; do
if [ -p "$XOB_PIPE_DIR/$pipe" ]; then
printf " [INFO] Removing existing pipe \"$pipe\"\n"
rm "$XOB_PIPE_DIR/$pipe"
fi
mkfifo "$XOB_PIPE_DIR/$pipe"
if [ -p "$XOB_PIPE_DIR/$pipe" ]; then
printf " [INFO] Successfully created pipe \"$pipe\". Binding an xob instance to it\n"
export $pipe="$XOB_PIPE_DIR/$pipe"
2018-08-21 23:53:11 -05:00
tail -f "$XOB_PIPE_DIR/$pipe" | xob -s "$pipe" -t 2 &
2018-08-21 22:59:37 -05:00
else
printf " [WARN] Failed to create pipe \"$pipe\"\n"
fi
done
else
printf " [INFO] Could not find a bar overlay application\n"
fi
# Conky
if which conky > /dev/null 2>&1; then
printf " [INFO] Starting conky\n"
# Use all the config files in its config directory
for file in $HOME/.config/conky/*.conf; do
printf " [INFO] Found config file $file\n"
conky -c $file&
done
else
printf " [INFO] Could not find a desktop statistics application\n"
fi
# Wallpaper management
2018-07-31 15:59:17 -05:00
printf "[INFO] Setting wallpaper\n"
if which xfdesktop > /dev/null 2>&1; then
2018-07-31 15:59:17 -05:00
printf " [INFO] Starting xfdesktop\n"
xfdesktop --disable-wm-check&
elif which feh > /dev/null 2>&1; then
2018-07-31 15:59:17 -05:00
printf " [INFO] Setting wallpaper with feh\n"
printf " [WARN] This solution may cause problems on multi-monitor systems\n"
feh --randomize --bg-fill ~/Pictures/Wallpapers/.active &
elif which xsetroot > /dev/null 2>&1; then
2018-07-31 15:59:17 -05:00
printf " [INFO] Setting root window color\n"
xsetroot -solid "#282828"
else
printf " [WARN] Could not find a wallpaper manager\n"
fi
printf "[INFO] Finished initialization\n"